d a t a s h e e t : c l d - c t 1 8 0 . 0 0 0 cree ? smd led model # lm6-thr-3b-n data sheet 120-degree, 3.3 x 3.5-mm, smt led in red color with water-transparent lens and black coated surface applications indoor and outdoor displays backlighting coupling into light guides rgb full-color displays absolute maximum ratings (t a = 25c) items symbol absolute maxi - mum rating unit r forward current note 1 i f 3 x 50 ma peak forward current note 2 i fp 3 x 200 ma reverse voltage v r 5 v power dissipation p d 3 x 160 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c junction temperature t j 110 c junction/ambient 1 chip on note 3 r thja 450 c/w junction/ambient 3 chips on note 3 r thja 650 c/w junction/solder point 1 chip on r thjs 300 c/w junction/solder point 3 chips on r thjs 450 c/w notes: single-color light. pulse width 0.1 msec, duty 1/10. r th test condition: mounted on pc board fr 4 (pad size 16 mm 2 ) typical electrical & optical characteristics (t a = 25c) characteristics condition symbol minimum typical maximum unit dominant wavelength i f = 3 x 20 ma dom 621 628 636 nm viewing angle at 50% i f = 3 x 20 ma 2? 120 deg forward voltage i f = 3 x 20 ma v f 2.5 3.2 v luminous intensity i f = 3 x 20 ma i v 710 1100 mcd reverse current (max) v r = 5 v i r 10 a ? ? ? ? 1. 2. 3. subject to change without notice. www.cree.com/ledlamps
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 2 cld-ct80.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps standard bins for lm6-thr-3b-n (i f = 3 x 20 ma) lamps are sorted to luminous intensity (i v ) and dominant wavelength ( d ) bins shown. orders for LM6-THR1-3B-N1 may be flled with any or all bins contained as below. all luminous intensity (i v ) and dominant wavelength ( d ) values shown and specifed are at i f = 3 x 20 ma. x1 or above w2 w1 v2 v1 important notes: all ranks will be included per delivery; rank ratio will be based on the dice distribution. tolerance of measurement of luminous intensity is 10%. tolerance of measurement of the dominant wavelength is 1 nm. tolerance of measurement of v f is 0.05 v. packaging methods are available for selection; please refer to the cree led lamp packaging standard docu - ment. please refer to the cree led lamp reliability test standards document for reliability test conditions. please refer to the cree led lamp soldering & handling document for information about how to use this led product safely. 1. 2. 3. 4. 5. 6. 7. 621 nm 636 nm dominant wavelength (wd) luminous intensity (i v ) 1800 mcd 1400 mcd 1120 mcd 900 mcd 710 mcd
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 3 cld-ct80.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps graphs 4/4 format #: cotco-d-074 rev.4 document no. spe/lm6-thr1-03-n1 rev. no. 03 graphs -60 fig.2 reverse current vs. domi wl= 628nm 400 half power wl=23nm fig.4 relative intensity vs. 0% 25% 50% 75% 100% vr(v) wave length. wl(nm) 700 500 600 800 900 -50.0 -40.0 reverse voltage. ir(ua) -10.0 -20.0 -30.0 -30 -50 -40 -20 0.0 -10 40 solder point temperature fig.5 maximum forward dc current vs 0 20 20 0 t ( c) 80 60 100 60 40 80 100 if(ma) fig.6 far field pattern. -90 -60 -30 90 0 30 60 0% 20% 40% 60% 80% 50% power angle : ie(%) 0 100% 40.0 relative luminous intensity 0.0 0.0 1.0 2.0 20.0 4.0 3.0 5.0 if(ma) 80.060.0 100.0 2.4 forward voltage. fig.1 forward current vs. 40.0 2.2 0.0 20.0 100.0 60.0 80.0 if (ma) 2.8 2.6 vf(v) 3.0 3.2 fig.3 relative luminous intensity vs. forward current 1 chip on 3 chip on 40 ambient temperature fig.7 maximum forward dc current vs 0 20 20 0 t ( c) 80 60 100 60 40 80 100 if(ma) 1 chip on 3 chip on items signatures date revision history prepared by wangfj 2007-04-06 rev.no date change description checked by xiejh 2007-04-06 02 2007-03-27 release. approved by davidliu 2007-04-06 03 2007-04-06 delete wd rank fcn# fcn20070101 data is subject to change without prior notice ; pleas e refer to cotco website for the latest version. copyright@2002 cotco international ltd.
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. cld-ct80.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps mechanical dimensions all dimensions are in mm. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu direc - tive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the eye. 2/4 format #: cotco-d-074 rev.4 document no. spe/lm6-thr1-03-n1 rev. no. 03 applications: d d i i m m e e n n s s i i o o n n d d r r a a w w i i n n g g - indoor and outdoor displays - backlighting - coupling into light guides - rgb full color displays absolute maximum ratings at ta = 25 c items symbol absolute maximum rating unit forward current *1 i f 3x50 ma peak forward current *2 i fp 3x200 ma reverse voltage v r 5 v power dissipation p d 3x160 mw operation temperature t opr -40~+100 c storage temperature tstg -40~+100 c junction temperature tj +110 c junction/ambient 1 chips on * 3 r th ja 450 c/w junction/ambient 3 chips on * 3 r th ja 650 c/w junction/solder point 1 chips on r th js 300 c/w junction/solder point 3 chips on r th js 450 c/w * pulse width <=0.1msec duty <=1/10 * 3 rth test condition: mounted on pc board fr 4(pad size >= 16mm 2 ) typical electrical & optical characteristics(ta = 25 c ) parameter symbol condition min. typ. max. unit dominant wavelength o dom i f =3x20ma 621 628 636 nm viewing angle at 50% 2 t ? i f =3x20ma --- 120 --- deg. forward voltage v f i f =3x20ma -- 2.5 3.2 v luminous intensity iv i f =3 x 20ma 710 1100 -- mcd reverse current i r v r =5v --- --- 10 p a
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 5 cld-ct80.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps kit number system cree led lamps are tested and sorted into performance bins. a bin is specifed b y ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following manner: * contact your cree sales representative for ordering information. standard available kits* kit number description LM6-THR1-3B-N1-00001 smd 120 high red 628nm, full rank, tape & reel * please contact your cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x wd/color 1: full-color distribution 2~9, a~z . . . : special request * i v 0: full luminous intensity distribution 1~9, a~z . . . : special request * v f 0: full forward v oltage distribution 1~9, a~z . . . : special request * pa cking type 0: standard = tape pack 1~9, a~z . . . : special request * standard/custom 0: standard c: custom product p/n
|
